Kategória: Lakás, otthon, kert, barkács
Honlap:
Részletek... * Download the app: Solarlife in the Apple Store for iOS SolarLifeBT in the Google Play Store for Android The SOL MPPT 60A (12-24-36-48V) solar controller is designed to charge batteries from a connected set of solar panels. This modern and multifunctional device uses the latest and most efficient MPPT charging technology. By optimizing the charging process, the controller effectively extends battery life compared to standard PWM controllers. The SOL MPPT 60A model is equipped with a wireless communication function that allows you to remotely control and monitor the controller's operating parameters. Key Features: Advanced MPPT (Max Power Point Tracking) technology. Conversion/tracking efficiency > 99.9% Clear LCD display showing the most important operating parameters Automatic voltage detection of the connected 12/24V battery For use with gel, AGM, lithium and liquid electrolyte batteries All LiFePO4 battery parameter settings are only available via the smartphone app. Temperature sensor with automatic temperature compensation (if the temperature exceeds the set value, the charging current is reduced to lower the temperature) Four-stage charging: MPPT, BOOST, Equalization, Float Multiple connected load control modes: permanently on, dusk to dawn, night and manual Control of the controller via a dedicated smartphone app Fully automatic protection (short circuit, temperature, overload) When charging batteries using the controller, be sure to select the appropriate battery type in the controller settings. Failure to use the appropriate battery charging mode can lead to premature wear, damage and loss of battery warranty. Furthermore, when operating in photovoltaic systems (cyclic battery charging), we recommend using batteries that are best suited for this purpose, such as GEL VPRO SOLAR, DEEP CYCLE VPRO SOLAR or lithium LiFePO4. We do not recommend using maintenance-free AGM batteries (e.g. AGM series, AGM OPTI, AGM VPRO) in photovoltaic installations (cyclic charging systems). Such batteries are designed and work best in buffer mode (voltage backup, UPS systems). Technical parameters: Maximum charging current: 60A Battery voltage: 12V/24V/36V/48V Maximum panel voltage: 150V Maximum current from Imp panels: 60A Self-power consumption: <=16mA (12V); <=12mA (24/36/48V) For batteries: AGM, GEL Raised voltage: 14~59.2V (at 25°C) Voltage compensation: 14~60V (at 25°C) Floating voltage: 13~58V (at 25°C) Low voltage receiver disconnect: 10.8~11.8V / 43.2~47.2V Reconnect voltage: 11.4~12.8V / 45.6~51.2V Overload protection: 15.8~62.3 V Temperature compression: -4.17 mV/K per cell (gain, offset) -3.33 mV/K per cell (holding voltage) Detection voltage for dusk/dawn: 5/10V Security: IP32 Dimension: 262x186x97mm Weight: 3 kg
